Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 841

dot1x tx-period s z S6000 Configure the intervals at which EAPOL PDUs are transmitted by the Authenticator PAE. Syntax dot1x tx-period seconds To return to the default, use the no dot1x tx-period command. Parameters seconds Enter the interval time, in seconds, that EAPOL PDUs are transmitted. Range: 1 to 65535 Default: 30 Defaults 30 seconds Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. show dot1x interface s z S6000 Display the 802.1X information on an interface. Syntax show dot1x interface interface Parameters interface Enter one of the following keywords and slot/port or number information: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/ port information. • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. Example Figure 39-5. show dot1x interface command Example FTOS#show dot1x int Gi 2/32 Security | 841