Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 939
dei mark, member
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 939 highlights
Command Mode INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on S6000. Introduced on Z9000 Introduced on S4810. Usage You must first enable DEI for this configuration to take effect. Information Related Commands dei enable Make packets eligible for dropping based on their DEI value dei mark z S6000 Set the DEI value on egress according to the color currently assigned to the packet. Syntax dei mark {green | yellow} {0 | 1} Parameters 0 | 1 green | yellow Enter the bit value you want to map to a color. Choose a color: • Green: High priority packets that are the least preferred to be dropped. • Yellow: Lower priority packets that are treated as best-effort. Defaults All the packets on egress will be marked with DEI 0. Command Mode INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on S6000. Introduced on Z9000 Introduced on S4810. Usage You must first enable DEI for this configuration to take effect. Information Related Commands dei enable Make packets eligible for dropping based on their DEI value. member z S6000 Assign a Stackable VLAN access or trunk port to a VLAN. The VLAN must contain the vlan-stack compatible command in its configuration. Syntax member interface To remove an interface from a Stackable VLAN, use the no member interface command. VLAN Stacking | 939