Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 637

area default-cost z S6000 Set the metric for the summary default route generated by the area border router (ABR) into the stub area. Use this command on the border routers at the edge of a stub area. Syntax area area-id default-cost cost To return default values, use the no area area-id default-cost command. Parameters area-id cost Specify the OSPF area in dotted decimal format (A.B.C.D.) or enter a number from zero (0) to 65535 Specifies the stub area's advertised external route metric. Range: zero (0) to 65535 Defaults Command Modes Command History cost = 1; no areas are configured. ROUTER OSPF Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on S6000. Introduced on Z9000 Introduced support for Multi-Process OSPF. Usage Information Related Commands In FTOS, cost is defined as reference bandwidth/bandwidth. area stub Create a stub area. area nssa z S6000 Specify an area as a Not So Stubby Area (NSSA). Syntax area area-id nssa [default-information-originate] [no-redistribution] [no-summary] To delete an NSSA, enter no area area-id nssa. Parameters area-id no-redistribution default-information-or iginate no-summary Specify the OSPF area in dotted decimal format (A.B.C.D) or enter a number from 0 and 65535. (OPTIONAL) Specify that the redistribute command should not distribute routes into the NSSA. You should only use this command in a NSSA Area Border Router (ABR). (OPTIONAL) Allows external routing information to be imported into the NSSA by using Type 7 default. (OPTIONAL) Specify that no summary LSAs should be sent into the NSSA. Defaults Command Mode Not configured ROUTER OSPF Open Shortest Path First (OSPFv2) | 637