Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 895

Command History Related Commands Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series logging logging on Enable logging to a Syslog server. Enables logging. logging history s z S6000 Specify which messages are logged to the history table of the switch and the SNMP network management station (if configured). Syntax logging history level To return to the default values, enter no logging history. Parameters level Indicate a value from 0 to 7 or enter one of the following equivalent words: emergencies, alerts, critical, errors, warnings, notifications, informational, or debugging. The default is 4. Defaults 4 or warnings Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Usage When you configure the snmp-server trap-source command, the system messages logged to the history Information table are also sent to the SNMP network management station. Related Commands show logging history Display information logged to the history buffer. logging history size s z S6000 Specify the number of messages stored in the FTOS logging history table. Syntax logging history size size To return to the default values, enter no logging history size. Parameters size Indicate a value as the number of messages to be stored. Range: 0 to 500. Default: 1 message. Defaults 1 message Simple Network Management Protocol and Syslog | 895