Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 228

www.dell.com | support.dell.com Version 7.2.1.0 Introduced capture bgp-pdu neighbor s z S6000 Enable capture of an IPv4 BGP neighbor packet. Syntax capture bgp-pdu neighbor ipv4-address direction {both | rx | tx} To disable capture of the IPv4 BGP neighbor packet, use the no capture bgp-pdu neighbor ipv4-address command. Parameters ipv4-address direction {both | rx | tx} Enter the IPv4 address of the target BGP neighbor. Enter the keyword direction and a direction- either rx for inbound, tx for outbound, or both. Defaults Not configured. Command Modes EXEC Privilege Related Commands capture bgp-pdu max-buffer-size show capture bgp-pdu neighbor Specify a size for the capture buffer. Display BGP packet capture information Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Version 7.5.1.0 Introduced on the S6000. Introduced on the Z9000. Introduced support on S-Series Introduced capture bgp-pdu max-buffer-size s z S6000 Set the size of the BGP packet capture buffer. This buffer size pertains to both IPv4 and IPv6 addresses. Syntax capture bgp-pdu max-buffer-size 100-102400000 Parameters 100-102400000 Enter a size for the capture buffer. Defaults 40960000 bytes. Command Modes EXEC Privilege Related Commands capture bgp-pdu neighbor show capture bgp-pdu neighbor Enable capture of an IPv4 BGP neighbor packet. Display BGP packet capture information for an IPv6 address. Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on the Z9000. 228 | Border Gateway Protocol