Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 862
protocol-tunnel rate-limit, show protocol-tunnel
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 862 highlights
www.dell.com | support.dell.com Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage FTOS must have the default CAM profile with the default microcode before you enable L2PT. Information protocol-tunnel rate-limit z S6000 Enable traffic rate limiting per box. Syntax protocol-tunnel rate-limit rate To reset the rate limit to the default, use the no protocol-tunnel rate-limit rate command. Parameters rate Enter the rate in frames per second. Range: 75 to 3000 Default: 75 Defaults 75 frames per second Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.4.1.0 Introduced on the S6000. Introduced on Z9000 Introduced Example Related Commands Figure 40-2. protocol-tunnel rate-limit Command Example FTOS# FTOS#conf FTOS(conf)#protocol-tunnel rate-limit 1000 FTOS(conf)# show protocol-tunnel show running-config Display tunneling information for all VLANs Display the current configuration. show protocol-tunnel z S6000 Display protocol tunnel information for all or a specified VLAN-Stack VLAN. Syntax show protocol-tunnel [vlan vlan-id] Parameters vlan vlan-id (OPTIONAL) Enter the keyword vlan followed by the VLAN ID to display information for the one VLAN. Range: 1 to 4094 Defaults No default values or behavior 862 | Service Provider Bridging