Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 941
show interface dei-mark, stack-unit stack-group
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 941 highlights
show interface dei-mark S6000 Display the dei mark configuration. Syntax show interface dei-mark [interface slot/port | linecard number port-set number] Parameters interface slot/port linecard number port-set number Enter the interface type followed by the stack-unit slot and port number. Enter linecard followed by the stack-unit slot number, then enter port-set followed by the port-pipe number. Command Mode EXEC Privilege Command History Example Related Commands Version 9.0.2.0 Introduced on S6000. FTOS#show interface dei-mark Default CFI/DEI Marking: 0 Interface Drop precedence CFI/DEI Gi 0/1 Green 0 Gi 0/1 Yellow 1 Gi 8/9 Yellow 0 Gi 8/40 Yellow 0 dei mark Set the DEI value on egress according to the color currently assigned to the packet. stack-unit stack-group S6000 Configure stacking group specified by ID. Syntax [no] stack-unit unit-id stack-group stack-group-id Parameters unit-id stack-group-id [no] Enter the stack unit ID. Enter the stack group ID. Range is 0 to 16. Use no stack-unit unit-id stack-group stack-id to remove the current stack group configuration. Defaults N/A Command Mode CONFIGURATION Command History Version 9.0.2.0 Version 8.3.10.2 Introduced on S6000. Introduced on S4810 VLAN Stacking | 941