Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 869

Parameters interval value Enter the interval value in seconds. Range: 15 to 86400 seconds Default: 20 seconds Defaults 20 seconds Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.7.1.0 Introduced on S6000 Introduced on Z9000 Introduces on S-Series Stacking Usage Information The polling interval for an interface is the maximum number of seconds between successive samples of counters to be sent to the collector. This command changes the global default counter polling (20 seconds) interval. You can configure an interface to use a different polling interval. Related Commands sflow polling-interval (Interface) Set the polling interval for an interface sflow polling-interval (Interface) s z S6000 Set the sFlow polling interval at an interface (overrides the global-level setting.) Syntax sflow polling-interval interval value To return to the default, use the no sflow polling-interval interval command. Parameters interval value Enter the interval value in seconds. Range: 15 to 86400 seconds Default: The global counter polling interval Defaults The same value as the current global default counter polling interval Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.7.1.0 Introduced on S6000 Introduced on Z9000 Introduced on S-Series Usage This command sets the counter polling interval for an interface. Information Related Commands sflow polling-interval (Global) Globally set the polling interval sFlow | 869