Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 955
Na/If, master, backup, Hold Down, Preempt, AdvInt, Adv rcvd, Adv sent, Gratuitous ARP, track
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 955 highlights
Table 47-2. Command Example Description: show vrrp Line Beginning with Description GigabitEthernet 12/3... Displays the Interface, the VRRP group ID, and the network address. If the interface is no sending VRRP packets, 0.0.0.0 appears as the network address. State: master... Displays the interface's state: • Na/If (not available), • master (MASTER virtual router) • backup (BACKUP virtual router) the interface's priority and the IP address of the MASTER. Hold Down:... This line displays additional VRRP configuration information: • Hold Down displays the hold down timer interval in seconds. • Preempt displays TRUE if preempt is configured and FALSE if preempt is not configured. • AdvInt displays the Advertise Interval in seconds. Adv rcvd:... This line displays counters for the following: • Adv rcvd displays the number of VRRP advertisements received on the interface. • Adv sent displays the number of VRRP advertisements sent on the interface. • Gratuitous ARP sent displays the number of gratuitous ARPs sent. Virtual MAC address Displays the virtual MAC address of the VRRP group. Virtual IP address Displays the virtual IP address of the VRRP router to which the interface is connected. Authentication:... States whether authentication is configured for the VRRP group. If it is, the authentication type and the password are listed. Tracking states... This line is displayed if the track command is configured on an interface. Below this line, the following information on the tracked interface is displayed: • Dn or Up states whether the interface is down or up. • the interface type slot/port information track z S6000 Monitor an interface and lower the priority value of the VRRP group on that interface if it is disabled. Syntax track interface [priority-cost] To disable monitoring, use the no track interface command. Virtual Router Redundancy Protocol (VRRP) | 955