Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 605

Defaults Without any options, this command clears the entire source-active cache. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. debug ip msdp z S6000 Turn on MSDP debugging. Syntax debug ip msdp {event peer address | packet peer address | pim} To turn debugging off, use the no debug ip msdp {event peer address | packet peer address | pim} command. Parameters event peer address packet peer address pim Enter the keyword event followed by the peer address in a dotted decimal format (A.B.C.D.). Enter the keyword packet followed by the peer address in a dotted decimal format (A.B.C.D.). Enter the keyword pim to debug advertisement from PIM. Defaults Not configured Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. ip msdp cache-rejected-sa z S6000 Enable a MSDP cache for the rejected source-active entries. Syntax ip msdp cache-rejected-sa {number} To clear the MSDP rejected source-active entries, use the no ip msdp cache-rejected-sa {number} command followed by the ip msdp cache-rejected-sa {number} command. Parameters number Enter the number of rejected SA entries to cache. Range: 0 to 32766 Defaults No default values or behavior Multicast Source Discovery Protocol (MSDP) | 605