Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 629
Multicast, Overview, IPv4 Multicast Commands
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 629 highlights
28 Multicast Overview This chapter contains the following sections: • IPv4 Multicast Commands The symbols s z under command headings indicate which Dell Networking - S6000 , S-Series or Z-Series, respectively - support the command. IPv4 Multicast Commands The IPv4 Multicast commands are: • clear ip mroute • ip mroute • ip multicast-routing • ip multicast-limit • show ip mroute • show ip rpf clear ip mroute s z S6000 Clear learned multicast routes on the multicast forwarding table. To clear the PIM tree information base, use clear ip pim tib command. Syntax clear ip mroute {group-address [source-address] | *} Parameters group-address [source-address] * Enter multicast group address and source address (if desired), in dotted decimal format, to clear information on a specific group. Enter * to clear all multicast routes. Command Modes EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Multicast | 629