Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 511
lacp port-priority, lacp system-priority
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 511 highlights
Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Version 8.5.1.0 l show lacp Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Added support for 4-port 40G stack-units on ExaScale. Display the lacp configuration lacp port-priority z S6000 Configure the port priority to influence which ports will be put in standby mode when there is a hardware limitation that prevents all compatible ports from aggregating. Syntax lacp port-priority priority-value To return to the default setting, use the no lacp port-priority priority-value command. Parameters priority-value Enter the port-priority value. The higher the value number the lower the priority. Range: 1 to 65535 Default: 32768 Defaults 32768 Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. lacp system-priority z S6000 Configure the LACP system priority. Syntax lacp system-priority priority-value Parameters priority-value Enter the system-priority value. The higher the value, the lower the priority. Range: 1 to 65535 Default: 32768 Defaults 32768 Command Modes CONFIGURATION Command History Version 9.0.2.0 Introduced on the S6000. Link Aggregation Control Protocol (LACP) | 511