Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 529

graceful-restart t2 S6000 Configure thewait time for the Graceful Restart timer T2 that a restarting router uses as the wait time for each database to synchronize. Syntax graceful-restart t2 {level-1 | level-2} seconds To return to the default, use the no graceful-restart t2command. Parameters level-1, level-2 seconds Enter the keyword level-1 or level-2 to identify the database instance type to which the wait interval applies. Range: 5-120 seconds Default: 30 seconds Defaults 30 seconds Command Modes ROUTER ISIS Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. graceful-restart t3 S6000 Configure the overall wait time before Graceful Restart is completed. Syntax graceful-restart t3 {adjacency | manual} seconds To return to the default, use the no graceful-restart t3command. Parameters adjacency manual Enter the keyword adjacency so that the restarting router receives the remaining time value from its peer and adjusts its T3 value accordingly if user has configured this option. Enter the keyword manual to specify a time value that the restarting router uses. Range: 50-120 seconds default: 30 seconds Defaults manual, 30 seconds Command Modes ROUTER ISIS Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Usage The running router sets remaining time value to the current adjacency hold time. This can be Information overridden by implementing this command. Override the default restart-wait time by entering the no graceful-restart restart-wait command. When restart-wait is disabled, the current adjacency hold time is used. | 529