Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 519

Related Commands domain-password isis password Allows you to set the authentication password for a routing domain. Allows you to configure an authentication password for an interface. clear config S6000 Clear IS-IS configurations that display under the router isis heading of the show running-config command output. Syntax clear config Command Modes ROUTER ISIS Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on S6000. Introduced on the S4810. Usage Use caution when you enter this command. Back up your configuration prior to using this command or Information your IS-IS configuration will be erased. Related Commands copy Use this command to save the current configuration to another location. clear isis S6000 Restart the IS-IS process. All IS-IS data is cleared. Syntax clear isis [tag] {* | database | traffic} Parameters tag * database traffic (Optional) Enter an alphanumeric string to specify the IS-IS routing tag area. Enter the keyword * to clear all IS-IS information and restarts the IS-IS process. This command removes IS-IS neighbor information and IS-IS LSP database information and the full SPF calculation will be done. Clears IS-IS LSP database information. Clears IS-IS counters. Command Modes EXEC privilege Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on S6000. Introduced on the S4810. clns host S6000 Define a name-to-network service mapping point (NSAP) mapping that can then be used with commands that require NSAPs and system IDs. Syntax clns host name nsap | 519