Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 295

Syntax show ip bgp [ipv4 [multicast | unicast] | ipv6 unicast] extcommunity-list name Parameters multicast unicast ipv6 unicast name Enter the keyword multicast to display the multicast route information. Enter the keyword unicast to display the unicast route information. Enter the keywords ipv6 unicast to display the IPv6 unicast route information. (OPTIONALLY) Enter the name of the extcommunity-list. Defaults No default values or behavior Command Modes EXEC Usage Information EXEC Privilege If there is a type or sub-type that is not well-known, it will be displayed as: TTSS:XX:YYYY Where TT is type, SS is sub-type displayed in hexadecimal format, XX:YYYY is the value divided into 2-byte and 4-byte values in decimal format. This format is consistent with other vendors. For example, if the extended community has type 0x04, sub-type 0x05, value 0x20 00 00 00 10 00, it will be displayed as: 0x0405:8192:4096 Non-transitive extended communities are marked with an asterisk, as shown in the figure below. Example Command History Figure 9-32. Command Example: show ip bgp ipv4 multicast extcommunity-list FTOS#show ip bgp ipv4 multicast extcommunity-list BGP routing table entry for 192.168.1.0/24, version 2 Paths: (1 available, table Default-IP-Routing-Table.) Not advertised to any peer Received from : 100.100.1.2 (2.4.0.1) Best AS_PATH : 200 Next-Hop : 100.100.1.2, Cost : 0 Origin IGP, Metric 4294967295 (Default), LocalPref 100, Weight 0, external Communities : 300:400 500:600 Extended Communities : RT:1111:4278080 SoO:35:4 SoO:36:50529043 SoO:38:50529045 SoO:0.0.0.2:33 SoO:506.62106:34 SoO:37:50529044 0x0303:254:11223* FTOS# Version 9.0.2.0 Version 9.0.0.0 Version 7.8.1.0 Introduced on the S6000. Introduced on Z9000 Introduced support on S-Series Border Gateway Protocol | 295