Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 696

www.dell.com | support.dell.com Usage Information This address is used by first-hop routers to send Register packets on behalf of source multicast hosts. The RP addresses are stored in the order in which they are entered. RP addresses learned via BSR take priority over static RP addresses. Without the override option, RPs advertised by the BSR updates take precedence over the statically configured RPs. ip pim rp-candidate s z S6000 Configure a PIM router to send out a Candidate-RP-Advertisement message to the Bootstrap (BS) router or define group prefixes that are defined with the RP address to PIM BSR. Syntax ip pim rp-candidate {interface [priority]} To return to the default value, enter no ip pim rp-candidate {interface [priority]} command. Parameters interface priority Enter the following keywords and slot/port or number information: • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For Port Channel interface types, enter the keyword port-channel followed by a number from 1 to 255. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the priority used in Bootstrap election process. Range: zero (0) to 255 Default: 192 Defaults Not configured. Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Introduced on S-Series Usage Priority is stored at BSR router when receiving a Candidate-RP-Advertisement. Information 696 | PIM-Sparse Mode (PIM-SM)