Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 625
spanning-tree, spanning-tree msti
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 625 highlights
Usage You must enable Multiple Spanning Tree Protocol prior to using this command. Information spanning-tree s z S6000 Enable Multiple Spanning Tree Protocol on the interface. Syntax spanning-tree To disable the Multiple Spanning Tree Protocol on the interface, use no spanning-tree Parameters spanning-tree Enter the keyword spanning-tree to enable the MSTP on the interface. Default: Enable Defaults Enable Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. spanning-tree msti s z S6000 Configure Multiple Spanning Tree instance cost and priority for an interface. Syntax spanning-tree msti instance {cost cost | priority priority} To remove the cost or priority for the MST instance, use no spanning-tree msti instance {cost cost | priority priority} Parameters msti instance cost cost priority priority Enter the keyword msti and the MST Instance number. Range: zero (0) to 63 (OPTIONAL) Enter the keyword cost followed by the port cost value. Range: 1 to 200000 Defaults: 100 Mb/s Ethernet interface = 200000 1-Gigabit Ethernet interface = 20000 10-Gigabit Ethernet interface = 2000 Port Channel interface with one 100 Mb/s Ethernet = 200000 Port Channel interface with one 1-Gigabit Ethernet = 20000 Port Channel interface with one 10-Gigabit Ethernet = 2000 Port Channel with two 1-Gigabit Ethernet = 18000 Port Channel with two 10-Gigabit Ethernet = 1800 Port Channel with two 100-Mbps Ethernet = 180000 Enter keyword priority followed by a value in increments of 16 as the priority. Range: 0 to 240. Default: 128 Multiple Spanning Tree Protocol (MSTP) | 625