Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 875

show snmp engineID s z S6000 Display the identification of the local SNMP engine and all remote engines that are configured on the router. Syntax show snmp engineID Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Example Related Commands Figure 42-2. show snmp engineID Command FTOS#show snmp engineID Local SNMP engineID: 0000178B02000001E80214A8 Remote Engine ID IP-addr 80001F88043132333435 172.31.1.3 80001F88043938373635 172.31.1.3 FTOS# Port 5009 5008 snmp-server engineID Configure local and remote SNMP engines on the router show snmp group s z S6000 Display the group name, security model, status, and storage type of each group. Syntax show snmp group Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Usage Information The following example displays a group named ngroup. The ngroup has a security model of version 3 (v3) with authentication (auth), the read and notify name is nview with no write view name specified, and finally the row status is active. Example Figure 42-3. show snmp group Command Example FTOS#show snmp group groupname: v1v2creadg readview : v1v2cdefault notifyview: v1v2cdefault row status: active FTOS# security model: v1 writeview: no write view specified context: no context specified Simple Network Management Protocol and Syslog | 875