Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 888

www.dell.com | support.dell.com The following command configures a remote user named n3user with a v3 security model and a security level of authNOPriv. FTOS#conf FTOS(conf)# snmp-server user n3user ngroup remote 172.31.1.3 udp-port 5009 3 auth md5 authpasswd Related Commands Note: The number of configurable users is limited to 16. show snmp user Display the information configured on each SNMP user name. snmp-server view s z S6000 Configure an SNMPv3 view. Syntax snmp-server view view-name oid-tree {included | excluded} To remove an SNMPv3 view, use the no snmp-server view view-name oid-tree {included | excluded} command. Parameters view-name oid-tree included excluded Enter the name of the view (not to exceed 20 characters). Enter the OID sub tree for the view (not to exceed 20 characters). (OPTIONAL) Enter the keyword included to include the MIB family in the view. (OPTIONAL) Enter the keyword excluded to exclude the MIB family in the view. Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Usage Information The oid-tree variable is a full sub-tree starting from 1.3.6 and can not specify the name of a sub-tree or a MIB. The following example configures a view named rview that allows access to all objects under 1.3.6.1: Example Related Commands Figure 42-10. snmp-server view Command Example FTOS# conf FTOS#(conf) snmp-server view rview 1.3.6.1 included show running-config snmp Display the SNMP running configuration 888 | Simple Network Management Protocol and Syslog