Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 464

www.dell.com | support.dell.com Last clearing of "show interfaces" counters 00:00:00 Queueing strategy: fifo 44507301 packets input, 3563070343 bytes Input 44506754 IP Packets, 0 Vlans 0 MPLS 41 64-byte pkts, 44502871 over 64-byte pkts, 249 over 127-byte pkts 407 over 255-byte pkts, 3127 over 511-byte pkts, 606 over 1023-byte pkts Received 0 input symbol errors, 0 runts, 0 giants, 0 throttles 0 CRC, 0 IP Checksum, 0 overrun, 0 discarded 1218120 packets output, 100745130 bytes, 0 underruns Output 5428 Multicasts, 4 Broadcasts, 1212688 Unicasts 1216142 IP Packets, 0 Vlans, 0 MPLS 0 throttles, 0 discarded Rate info (interval 299 sec): Input 01.50Mbits/sec, 2433 packets/sec Output 00.02Mbits/sec, 4 packets/sec Time since last interface status change: 00:22:34 FTOS# Table 20-11. show interfaces port-channel Command Example Fields Field Port-Channel 1... Hardware is... Port-channel is part... Internet address... MTU 1554... LineSpeed Members in this... ARP type:... Last clearing... Queueing strategy. packets input... Input 0 IP packets... 0 64-byte... Received 0... Output 0... Rate information... Time since... Description Displays the LAG's status. In the example, the status of the LAG's LAG fate-sharing group ("Failover-group") is listed. Displays the interface's hardware information and its assigned MAC address. Indicates whether the LAG is part of a LAG fate-sharing group ("Failover-group"). States whether an IP address is assigned to the interface. If one is, that address is displayed. Displays link and IP MTU. Displays the interface's line speed. For a port channel interface, it is the line speed of the interfaces in the port channel. Displays the interfaces belonging to this port channel. Displays the ARP type and the ARP timeout value for the interface. Displays the time when the show interfaces counters were cleared. States the packet queuing strategy. FIFO means first in first out. Displays the number of packets and bytes into the interface. Displays the number of packets with IP headers, VLAN tagged headers and MPLS headers. The number of packets may not add correctly because a VLAN tagged IP packet counts as both a VLAN packet and an IP packet. Displays the size of packets and the number of those packets entering that interface. This information is displayed over two lines. Displays the type and number of errors or other specific packets received. This information is displayed over three lines. Displays the type and number of packets sent out the interface. This information is displayed over three lines. Displays the traffic rate information into and out of the interface. Traffic rate is displayed in bits and packets per second. Displays the time since the last change in the configuration of this interface. 464 | Interfaces