Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 500

www.dell.com | support.dell.com all static summary (OPTIONAL) Enter the keyword all to view both active and non-active routes. (OPTIONAL) Enter the keyword static to view only routes configured by the ip route command. (OPTIONAL) Enter the keyword summary. See show ip route summary. Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on the Z9000. Example Example Figure 21-16. show ip route all Command Example FTOS#show ip route all Codes: C - connected, S - static, R - RIP B - BGP, IN - internal BGP, EX - external BGP, LO - Locally Originated O - OSPF, IA - OSPF inter area N1 - OSPF NSSA external type 1 N2 - OSPF NSSA external type 2, E1 - OSPF external type 1 E2 - OSPF external type 2, i - IS-IS, L1 - IS-IS level-1 L2 - IS-IS level-2, IA - IS-IS inter area, * - candidate default > - non-active route + - summary route Gateway of last resort is not set Destination ----------R 3.0.0.0/8 C > R C > R FTOS# 100.10.10.0/24 100.10.10.0/24 101.10.10.0/24 101.10.10.0/24 Gateway ------via 100.10.10.10, So 2/8 via 101.10.10.10, So 2/9 Direct, So 2/8 Direct, So 2/8 Direct, So 2/9 Direct, So 2/9 Dist/Metric Last Change 120/1 00:07:12 0/0 120/0 0/0 120/0 00:08:54 00:08:54 00:09:15 00:09:15 Figure 21-17. show ip route summary and show ip route static Command Examples FTOS#show ip route summary Route Source Active Routes Non-active Routes connected 2 0 static 1 0 Total 3 0 Total 3 active route(s) using 612 bytes R1_E600i>show ip route static ? | Pipe through a command R1_E600i>show ip route static Destination Gateway Dist/Metric Last Change ----------- ------- *S 0.0.0.0/0 via 10.10.91.9, Gi 1/2 1/0 3d2h FTOS> 500 | IPv4 Routing