Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 954
Command Example: show vrrp, Table 47-1., Command Example Descriptions: show vrrp brief
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 954 highlights
www.dell.com | support.dell.com Table 47-1. Command Example Descriptions: show vrrp brief Item State Master addr Virtual addr(s) Description Displays the operational state of the interface by using one of the following: • NA/IF (the interface is not available). • MASTER (the interface associated with the MASTER router). • BACKUP (the interface associated with the BACKUP router). Displays the IP address of the MASTER router. Displays the virtual IP addresses of the VRRP routers associated with the interface. Figure 47-3. Command Example: show vrrp FTOS>show vrrp GigabitEthernet 12/3, VRID: 1, Net: 10.1.1.253 State: Master, Priority: 105, Master: 10.1.1.253 (local) Hold Down: 0 sec, Preempt: TRUE, AdvInt: 1 sec Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0 Virtual MAC address: 00:00:5e:00:01:01 Virtual IP address: 10.1.1.252 Authentication: (none) Tracking states for 1 interfaces: Up GigabitEthernet 12/17 priority-cost 10 GigabitEthernet 12/4, VRID: 2, Net: 10.1.2.253 State: Master, Priority: 110, Master: 10.1.2.253 (local) Hold Down: 10 sec, Preempt: TRUE, AdvInt: 1 sec Adv rcvd: 0, Adv sent: 1862, Gratuitous ARP sent: 0 Virtual MAC address: 00:00:5e:00:01:02 Virtual IP address: 10.1.2.252 Authentication: (none) Tracking states for 2 interfaces: Up GigabitEthernet 2/1 priority-cost 10 Up GigabitEthernet 12/17 priority-cost 10 FTOS> 954 | Virtual Router Redundancy Protocol (VRRP)