Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 905

Parameters interface (OPTIONAL) Enter one of the following interfaces to display the interface specific storm control configuration. • For Fast Ethernet, enter the keyword Fastethernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. Defaults No default behavior or values Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Example Figure 43-1. show storm-control multicast Command Example FTOS#show storm-control multicast gigabitethernet 1/0 Multicast storm control configuration Interface Direction Packets/Second Gi 1/0 Ingress 5 FTOS# show storm-control unknown-unicast z S6000 Display the storm control unknown-unicast configuration Syntax show storm-control unknown-unicast [interface] Parameters interface (OPTIONAL) Enter one of the following interfaces to display the interface specific storm control configuration. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • Fast Ethernet is not supported. Defaults No default behavior or values Command Modes EXEC EXEC Privilege Storm Control | 905