Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 700

www.dell.com | support.dell.com Table 30-2. show ip pim neighbor Command Example Fields Field Uptime/expires Ver DR prio/Mode Description Displays the amount of time the neighbor has been up followed by the amount of time until the neighbor is removed from the multicast routing table (that is, until the neighbor hold time expires). Displays the PIM version number. • v2 = PIM version 2 Displays the Designated Router priority and the mode. • 1 = default Designated Router priority (use ip pim dr-priority) • DR = Designated Router • S = source show ip pim rp s z S6000 View all multicast groups-to-RP mappings. Syntax show ip pim rp [mapping | group-address] Parameters mapping group-address (OPTIONAL) Enter the keyword mapping to display the multicast groups-to-RP mapping and information on how RP is learnt. (OPTIONAL) Enter the multicast group address mask in dotted decimal format to view RP for a specific group. Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Introduced on S-Series Example 1 Example 2 Figure 30-5. show ip pim rp mapping Command Example 1 FTOS#sh ip pim rp Group RP 224.2.197.115 165.87.20.4 224.2.217.146 165.87.20.4 224.3.3.3 165.87.20.4 225.1.2.1 165.87.20.4 225.1.2.2 165.87.20.4 229.1.2.1 165.87.20.4 229.1.2.2 165.87.20.4 FTOS# Figure 30-6. show ip pim rp mapping Command Example 2 FTOS#sh ip pim rp mapping Group(s): 224.0.0.0/4 RP: 165.87.20.4, v2 Info source: 165.87.20.5, via bootstrap, priority 0 Uptime: 00:03:11, expires: 00:02:46 700 | PIM-Sparse Mode (PIM-SM)