Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 362
that are available to Microsoft Dynamic Host Configuration Protocol DHCP clients.
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 362 highlights
www.dell.com | support.dell.com netbios-name-server s z S6000 Specify the NetBIOS Windows Internet Naming Service (WINS) name servers, in order of preference, that are available to Microsoft Dynamic Host Configuration Protocol (DHCP) clients. Syntax netbios-name-server address [address2...address8] Parameters address Enter the address of the NETBIOS name server. You may enter up to 8, in order of preference. Command Mode DHCP Default None Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series netbios-node-type s z S6000 Specify the NetBIOS node type for a Microsoft DHCP client. Dell Networking recommends specifying clients as hybrid. Syntax netbios-node-type type Parameters type Enter the NETBIOS node type. Broadcast: Enter the keyword b-node. Hybrid: Enter the keyword h-node. Mixed: Enter the keyword m-node. Peer-to-peer: Enter the keyword p-node. Command Mode DHCP Default Hybrid Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series network s z S6000 Specify the range of addresses in an address pool. Syntax network network /prefix-length Parameters network/ prefix-length Specify a range of addresses. Prefix-length Range: 17-31 362 | Dynamic Host Configuration Protocol (DHCP)