Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 701

Example 3 RP: 165.87.20.3, v2 Info source: 165.87.20.5, via bootstrap, priority 0 Uptime: 00:03:11, expires: 00:03:03 FTOS# Figure 30-7. show ip pim rp group-address Command Example 3 FTOS#sh ip pim rp 229.1.2.1 Group RP 229.1.2.1 165.87.20.4 FTOS# show ip pim tib s z S6000 View the PIM tree information base (TIB). Syntax show ip pim tib [group-address [source-address]] Parameters group-address source-address (OPTIONAL) Enter the group address in dotted decimal format (A.B.C.D) (OPTIONAL) Enter the source address in dotted decimal format (A.B.C.D). Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Version 7.8.1.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Introduced on S-Series Example Figure 30-8. show ip pim tib Command Example FTOS#show ip pim tib PIM Multicast Routing Table Flags: D - Dense, S - Sparse, C - Connected, L - Local, P - Pruned, R - RP-bit set, F - Register flag, T - SPT-bit set, J - Join SPT, M - MSDP created entry, A - Candidate for MSDP Advertisement, K - Ack-Pending State Timers: Uptime/Expires Interface state: Interface, next-Hop, State/Mode (*, 226.1.1.1), uptime 01:29:19, expires 00:00:52, RP 10.211.2.1, flags: SCJ Incoming interface: TenGigabitEthernet 4/23, RPF neighbor 10.211.1.2 Outgoing interface list: TenGigabitEthernet 8/0 (*, 226.1.1.2), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ Incoming interface: TenGigabitEthernet 4/23, RPF neighbor 10.211.1.2 Outgoing interface list: TenGigabitEthernet 8/0 (*, 226.1.1.3), uptime 00:18:08, expires 00:00:52, RP 10.211.2.1, flags: SCJ PIM-Sparse Mode (PIM-SM) | 701