Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 276

www.dell.com | support.dell.com Example 3 Example 4 Figure 9-18. Command Example: show ip bgp neighbors received-routes FTOS#show ip bgp neighbors 100.10.10.2 received-routes BGP table version is 13, local router ID is 120.10.10.1 Status codes: s suppressed, S stale, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network D 70.70.21.0/24 D 70.70.22.0/24 D 70.70.23.0/24 D 70.70.24.0/24 *> 70.70.25.0/24 *> 70.70.26.0/24 *> 70.70.27.0/24 *> 70.70.28.0/24 *> 70.70.29.0/24 FTOS# Next Hop 100.10.10.2 100.10.10.2 100.10.10.2 100.10.10.2 100.10.10.2 100.10.10.2 100.10.10.2 100.10.10.2 100.10.10.2 Metric 0 0 0 0 LocPrf Weight Path 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? Figure 9-19. Command Example: show ip bgp neighbors denied-routes FTOS#show ip bgp neighbors 100.10.10.2 denied-routes 4 denied paths using 205 bytes of memory BGP table version is 34, local router ID is 100.10.10.2 Status codes: s suppressed, S stale, d damped, h history, * valid, > best Path source: I - internal, a - aggregate, c - confed-external, r redistributed n - network, D - denied, S - stale Origin codes: i - IGP, e - EGP, ? - incomplete Network D 70.70.21.0/24 D 70.70.22.0/24 D 70.70.23.0/24 D 70.70.24.0/24 FTOS# Next Hop 100.10.10.2 100.10.10.2 100.10.10.2 100.10.10.2 Metric Table 9-9. Command Example fields: show ip bgp neighbors LocPrf Weight Path 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? 0 0 100 200 ? Lines beginning with BGP neighbor BGP version BGP state Last read Description Displays the BGP neighbor address and its AS number. The last phrase in the line indicates whether the link between the BGP router and its neighbor is an external or internal one. If they are located in the same AS, then the link is internal; otherwise the link is external. Displays the BGP version (always version 4) and the remote router ID. Displays the neighbor's BGP state and the amount of time in hours:minutes:seconds it has been in that state. This line displays the following information: • last read is the time (hours:minutes:seconds) the router read a message from its neighbor • hold time is the number of seconds configured between messages from its neighbor • keepalive interval is the number of seconds between keepalive messages to help ensure that the TCP session is still alive. 276 | Border Gateway Protocol