Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 549
router isis
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 549 highlights
Parameters process-id metric metric-value metric-type {external | internal} level-1 level-1-2 level-2 match {external | internal} route-map map-name Enter a number that corresponds to the OSPF process ID to be redistributed. Range: 1 to 65355 (OPTIONAL) The value used for the redistributed route. You should use a metric value that is consistent with the destination protocol. Range: 0 to 16777215 Default: 0. (OPTIONAL) The external link type associated with the default route advertised into a routing domain. The two options are: • external • internal (OPTIONAL) Routes are independently redistributed into IS-IS as Level 1 routes. (OPTIONAL) Routes are independently redistributed into IS-IS as Level-1-2 routes. (OPTIONAL) Routes are independently redistributed into IS-IS as Level 2 routes. This is the default. (OPTIONAL) The command used for OSPF to route and redistribute into other routing domains. The values are • internal • external map-name is an identifier for a configured route map. The route map should filter imported routes from the source routing protocol to the current routing protocol. If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes will be imported. Defaults As above Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Usage Information How a metric value assigned to a redistributed route is advertised depends on how on the configuration of the metric-style command. If the metric-style command is set for narrow mode and the metric value in the redistribute ospf command is set to a number higher than 63, the metric value advertised in LSPs will be 63. If the metric-style command is set for wide mode, an the metric value in the redistribute ospf command is advertised. router isis S6000 Allows you to enable the IS-IS routing protocol and to specify an IP IS-IS process. Syntax router isis [tag] To disable IS-IS routing, enter no router isis [tag]. | 549