Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 692
ip pim bsr-candidate, ip pim dr-priority
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 692 highlights
www.dell.com | support.dell.com ip pim bsr-candidate s z S6000 Configure the PIM router to join the Bootstrap election process. Syntax ip pim bsr-candidate interface [hash-mask-length] [priority] To return to the default value, enter no ip pim bsr-candidate. Parameters interface hash-mask-length priority Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Loopback interface, enter the keyword loopback followed by a number from 0 to 16383. • For Port Channel interface types, enter the keyword port-channel followed by a number from 1 to 255. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For a VLAN, enter the keyword vlan followed by a number from 1 to 4094. (OPTIONAL) Enter the hash mask length. Range: zero (0) to 32 Default: 30 (OPTIONAL) Enter the priority used in Bootstrap election process. Range: zero (0) to 255 Default: zero (0) Defaults Not configured. Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. ip pim dr-priority s z S6000 Change the Designated Router (DR) priority for the interface. Syntax ip pim dr-priority priority-value To remove the DR priority value assigned, use the no ip pim dr-priority command. Parameters priority-value Enter a number. Preference is given to larger/higher number. Range: 0 to 4294967294 Default: 1 Defaults 1 Command Modes INTERFACE 692 | PIM-Sparse Mode (PIM-SM)