Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 548

www.dell.com | support.dell.com metric-type {external| internal} route-map map-name (OPTIONAL) The external link type associated with the default route advertised into a routing domain. The two options are: • external • internal map-name is an identifier for a configured route map. The route map should filter imported routes from the source routing protocol to the current routing protocol. If you do not specify a map-name, all routes are redistributed. If you specify a keyword, but fail to list route map tags, no routes will be imported. Defaults IS-IS Level 2 routes only Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Example Command History Figure 23-1. redistribute bgp Command Example FTOS(conf)#router is FTOS(conf-router_isis)#redistribute bgp 1 level-1 metric 32 metric-type external route-map rmap-isis-to-bgp FTOS(conf-router_bgp)#show running-config isis ! router isis redistribute bgp 1 level-1 metric 32 metric-type external route-map rmap-isis-to-bgp Version 7.5.1.0 Version 9.0.2.0 Introduced IPv6 ISIS support Introduced on the S6000 Usage Information BGP to IS-IS redistribution supports "match" options using route maps. The metric value, level, and metric-type of redistributed routes can be set by the redistribution command. More advanced "set" options can be performed using route maps. redistribute ospf S6000 Redistribute routing information from an OSPF process. Syntax redistribute ospf process-id [level-1| level-1-2 | level-2] [match {internal | external}] [metric metric-value] [metric-type {external | internal}] [route-map map-name] To return to the default values, enter the no redistribute ospf process-id [level-1| level-1-2 | level-2] [match {internal | external}] [metric metric-value][metric-type {external | internal}] [route-map map-name] command. 548 |