Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 659
passive-interface, passive-interface default, redistribute, connected, static, metric, metric-type
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 659 highlights
The default keyword sets all interfaces as passive. You can then configure individual interfaces, where adjacencies are desired, using the no passive-interface interface command. The no form of this command is inserted into the configuration for individual interfaces when the no passive-interface interface command is issued while passive-interface default is configured. This command behavior has changed as follows: passive-interface interface • The previous no passive-interface interface is removed from the running configuration. • The ABR status for the router is updated. • Save passive-interface interface into the running configuration. passive-interface default • All present and future OSPF interface are marked as passive. • Any adjacency are explicitly terminated from all OSPF interfaces. • All previous passive-interface interface commands are removed from the running configuration. • All previous no passive-interface interface commands are removed from the running configuration. no passive-interface interface • Remove the interface from the passive list. • The ABR status for the router is updated. • If passive-interface default is specified, then save no passive-interface interface into the running configuration. No passive-interface default • Clear everything and revert to the default behavior. • All previously marked passive interfaces are removed. • May update ABR status. redistribute z S6000 Redistribute information from another routing protocol throughout the OSPF process. Syntax redistribute {connected | rip | static} [metric metric-value | metric-type type-value] [route-map map-name] [tag tag-value] To disable redistribution, use the no redistribute {connected | isis | rip | static} command. Parameters connected rip static metric metric-value Enter the keyword connected to specify that information from active routes on interfaces is redistributed. Enter the keyword rip to specify that RIP routing information is redistributed. Enter the keyword static to specify that information from static routes is redistributed. (OPTIONAL) Enter the keyword metric followed by a number. Range: 0 (zero) to 16777214. Open Shortest Path First (OSPFv2) | 659