Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 584
Table 24-4., Description of show fefd display, Example, Related, Commands, History
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 584 highlights
www.dell.com | support.dell.com Example FTOS#sh fefd FEFD is globally 'ON', interval is 10 seconds, mode is 'Aggressive'. INTERFACE Gi 5/0 Gi 5/1 Gi 5/2 Gi 5/3 Gi 5/4 Gi 5/5 Gi 5/6 Gi 5/7 Gi 5/8 Gi 5/9 Gi 5/10 Gi 5/11 FTOS# MODE Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive Aggressive NA Aggressive INTERVAL (second) 10 10 10 10 10 10 10 10 10 10 NA 10 Table 24-4. Description of show fefd display STATE Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Admin Shutdown Locally disabled Err-disabled Field Interface Mode Interval State Description Displays the interfaces type and number. Displays the mode (aggressive or normal) or NA if the interface contains fefd reset in its configuration. Displays the interval between FEFD packets. Displays the state of the interface and can be one of the following: • bi-directional (interface is up and connected and ing neighbor's echoes) • err-disabled (only found when the FEFD mode is aggressive and when the interface has not n its neighbor's echoes for 3 times the message interval. To reset an interface in this state, use the fefd reset command.) • unknown (only found when FEFD mode is normal • locally disabled (interface contains the fefd reset command in its configuration) • Admin Shutdown (interface is disabled with the shutdown command) Related Commands Command History fefd fefd-global fefd reset Enable Far-End Failure Detection. Enable FEFD globally on the system. Reset all interfaces or a single interface that was in "error-disabled" mode. Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. 584 | Layer 2