Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 714

www.dell.com | support.dell.com Related Commands private-vlan mapping secondary-vlan show interfaces private-vlan show vlan private-vlan show vlan private-vlan mapping switchport mode private-vlan Set the mode of the selected VLAN to primary and then associate secondary VLANs to it. Display type and status of PVLAN interfaces. Display PVLANs and/or interfaces that are part of a PVLAN. Display primary-secondary VLAN mapping. Set the PVLAN mode of the selected port. private-vlan mapping secondary-vlan s z S6000 Map secondary VLANs to the selected primary VLAN. Syntax [no] private-vlan mapping secondary-vlan vlan-list To remove specific secondary VLANs from the configuration, use the no private-vlan mapping secondary-vlan vlan-list command syntax. Parameters vlan-list Enter the list of secondary VLANs to associate with the selected primary VLAN, as described above. The list can be in comma-delimited or hyphenated-range format, following the convention for range input. Defaults none Command Modes INTERFACE VLAN Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. Usage Information The list of secondary VLANs can be: • Specified in comma-delimited or hyphenated-range format. • Specified with this command even before they have been created. • Amended by specifying the new secondary VLAN to be added to the list. Related Commands private-vlan mode show interfaces private-vlan show vlan private-vlan show vlan private-vlan mapping switchport mode private-vlan Set the mode of the selected VLAN to community, isolated, or primary. Display type and status of PVLAN interfaces. Display PVLANs and/or interfaces that are part of a PVLAN. Display primary-secondary VLAN mapping. Set the PVLAN mode of the selected port. show interfaces private-vlan s S6000 Display type and status of PVLAN interfaces. 714 | Private VLAN (PVLAN)