Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 606

www.dell.com | support.dell.com Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Related Commands show ip msdp sa-cache rejected-sa Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Description. ip msdp default-peer z S6000 Define a default peer from which to accept all Source-Active (SA) messages. Syntax ip msdp default-peer peer address [list name] To remove the default peer, use the no ip msdp default-peer {peer address} list name command. Parameters peer address list name Enter the peer address in a dotted decimal format (A.B.C.D.) Enter this keyword and specify a standard access list that contains the RP address that should be treated as the default peer. If no access list is specified, then all SAs from the peer are accepted. Defaults Not configured Command Modes CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.3.7.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S4810. Usage If a list is not specified, all SA messages received from the default peer are accepted. You can enter Information multiple default peer commands. ip msdp log-adjacency-changes z S6000 Enable logging of MSDP adjacency changes. Syntax ip msdp log-adjacency-changes To disable logging, use the no ip msdp log-adjacency-changes command. Defaults Not configured Command Modes CONFIGURATION 606 | Multicast Source Discovery Protocol (MSDP)