Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 399
Internet Group Management Protocol (IGMP), Overview, IGMP Commands, Important Points to Remember
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 399 highlights
19 Internet Group Management Protocol (IGMP) Overview This chapter contains the following sections: • IGMP Commands • IGMP Snooping Commands The symbols s z under command headings indicate which Dell Networking platforms - S6000 , or Z-Series, respectively - support the command.. IGMP Commands FTOS supports IGMPv1/v2/v3 and is compliant with RFC-3376. Important Points to Remember • FTOS supports PIM-SM and PIM-SSM include and exclude modes. • IGMPv2 is the default version of IGMP on interfaces. IGMPv3 can be configured on interfaces, and is backward compatible with IGMPv2. • The maximum number of interfaces supported is 512 on the S-Series 31 interfaces are supported. Note: The Z9000 supports up to 95 interfaces. • Maximum number of groups supported - no hard limit • IGMPv3 router interoperability with IGMPv2 and IGMPv1 routers on the same subnet is not supported. • An administrative command (ip igmp version) is added to manually set the IGMP version. • All commands, previously used for IGMPv2, are compatible with IGMPv3. The commands include: • clear ip igmp groups • debug ip igmp • ip igmp access-group • ip igmp group-join-limit • ip igmp immediate-leave • ip igmp last-member-query-interval • ip igmp querier-timeout • ip igmp query-interval Internet Group Management Protocol (IGMP) | 399