Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 436
portmode hybrid configuration example, the Tagged Hybrid Interface
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 436 highlights
www.dell.com | support.dell.com Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S4810 Example Usage Information Figure 20-20. portmode hybrid configuration example FTOS(conf)#interface gi 7/0 FTOS(conf-if-gi-7/0)#portmode hybrid FTOS(conf-if-gi-7/0)#interface vlan 10 FTOS(conf-if-vl-10)#untagged gi 7/0 FTOS(conf-if-vl-10)#interface vlan 20 FTOS(conf-if-vl-20)#tagged gi 7/0 FTOS(conf-if-vl-20)# The figure above sets a port as hybrid, makes the port a tagged member of VLAN 20, and an untagged member of VLAN 10, which becomes the native VLAN of the port. The port will now accept: • untagged frames and classify them as VLAN 10 frames • VLAN 20 tagged frames The next figure is an example show output with "Hybrid" as the newly added value for 802.1QTagged. The options for this field are: • True-port is tagged • False-port is untagged • Hybrid-port accepts both tagged and untagged frames Example Figure 20-21. Display the Tagged Hybrid Interface FTOS(conf-if-vl-20)#do show interfaces switchport Name: GigabitEthernet 7/0 802.1QTagged: Hybrid Vlan membership: Vlan 10, Vlan 20 Native VlanId: 10 FTOS(conf-if-vl-20)# The figure below is an example unconfiguration of the hybrid port using the no portmode hybrid command. Note: You must remove all other configurations on the port before you can remove the hybrid configuration from the port. Example Related Commands Figure 20-22. Unconfigure the hybrid port FTOS(conf-if-vl-20)#interface vlan 10 FTOS(conf-if-vl-10)#no untagged gi 7/0 FTOS(conf-if-vl-10)#interface vlan 20 FTOS(conf-if-vl-20)#no tagged gi 7/0 FTOS(conf-if-vl-20)#interface gi 7/0 FTOS(conf-if-gi-7/0)#no portmode hybrid FTOS(conf-if-vl-20)# show interfaces switchport switchport vlan-stack trunk Display the configuration of switchport (Layer 2) interfaces on the switch. Place the interface in a Layer 2 mode. Specify an interface as a trunk port to the Stackable VLAN network. 436 | Interfaces