Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 672

www.dell.com | support.dell.com Related Commands show ip ospf database Displays OSPF database information. show ip ospf database nssa-external z S6000 Display NSSA-External (type 7) LSA information. Syntax show ip ospf database nssa-external [link-state-id] [adv-router ip-address] Parameters link-state-id adv-router ip-address (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC Command History EXEC Privilege Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on S6000. Introduced on Z9000 Introduced support for Multi-Process OSPF. Related Commands show ip ospf database Displays OSPF database information. show ip ospf database opaque-area z S6000 Display the opaque-area (type 10) LSA information. Syntax show ip ospf process-id database opaque-area [link-state-id] [adv-router ip-address] Parameters process-id link-state-id adv-router ip-address Enter the OSPF Process ID to show a specific process. If no Process ID is entered, command applies only to the first OSPF process. (OPTIONAL) Specify LSA ID in dotted decimal format. The LSA ID value depends on the LSA type, and it can be one of the following: • the network's IP address for Type 3 LSAs or Type 5 LSAs • the router's OSPF router ID for Type 1 LSAs or Type 4 LSAs • the default destination (0.0.0.0) for Type 5 LSAs (OPTIONAL) Enter the keywords adv-router ip-address to display only the LSA information about that router. Command Modes EXEC EXEC Privilege 672 | Open Shortest Path First (OSPFv2)