Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 653
ip ospf message-digest-key
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 653 highlights
Syntax ip ospf hello-interval seconds To return to the default value, enter no ip ospf hello-interval. Parameters seconds Enter a the number of second as the delay between hello packets. Range: 1 to 65535 Default: 10 seconds. Defaults 10 seconds Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage The time interval between hello packets must be the same for routers in a network. Information Related Commands ip ospf dead-interval Set the time interval before a router is declared dead. ip ospf message-digest-key z S6000 Enable OSPF MD5 authentication and send an OSPF message digest key on the interface. Syntax ip ospf message-digest-key keyid md5 key To delete a key, use the no ip ospf message-digest-key keyid command. Parameters keyid key Enter a number as the key ID. Range: 1 to 255 Enter a continuous character string as the password. Defaults No MD5 authentication is configured. Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage Information To change to a different key on the interface, enable the new key while the old key is still enabled. The FTOS will send two packets: the first packet authenticated with the old key, and the second packet authenticated with the new key. This process ensures that the neighbors learn the new key and communication is not disrupted by keeping the old key enabled. Open Shortest Path First (OSPFv2) | 653