Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 936

www.dell.com | support.dell.com show ntp status s z S6000 Display the current NTP status. Syntax show ntp status Command Modes EXEC EXEC Privilege Command History Version 9.0.0.0 Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Added support for IPv6 Introduced on the S6000. Introduced on Z9000 Support added for S-Series Example Figure 45-7. show ntp status Command Example FTOS#sh ntp sta Clock is synchronized, stratum 2, reference is 100.10.10.10 frequency is -32.000 ppm, stability is 15.156 ppm, precision is 4294967290 reference time is BC242FD5.C7C5C000 (10:15:49.780 UTC Mon Jan 10 2000) clock offset is clock offset msec, root delay is 0.01656 sec root dispersion is 0.39694 sec, peer dispersion is peer dispersion msec peer mode is client FTOS# Table 45-2. show ntp status Command Example Information Field "Clock is..." "frequency is..." "reference time is..." "clock offset is..." "root dispersion is..." "peer mode is..." Description States whether or not the switch clock is synchronized, which NTP stratum the system is assigned and the IP address of the NTP peer. Displays the frequency (in ppm), stability (in ppm) and precision (in Hertz) of the clock in this system. Displays the reference time stamp. Displays the system offset to the synchronized peer and the time delay on the path to the NTP root clock. Displays the root and path dispersion. State what NTP mode the switch is. This should be client mode. Related Commands show ntp associations Display information on NTP master and peer configurations. 936 | System Time and Date