Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 220
bgp dampening
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 220 highlights
www.dell.com | support.dell.com Syntax bgp confederation peers as-number [...as-number] To return to the default, enter no bgp confederation peers. Parameters as-number ...as-number Enter the AS number. Range: 0-65535 (2-Byte) or 1-4294967295 (4-Byte) or 0.1-65535.65535 (Dotted format) (OPTIONAL) Enter up to 16 confederation numbers. Range: 0-65535 (2-Byte) or 1-4294967295 (4-Byte) or 0.1-65535.65535 (Dotted format) Defaults Not configured. Command Modes ROUTER BGP Usage Information All the routers in the Confederation must be 4 or 2 byte identified routers. You cannot mix them. The Autonomous Systems configured in this command are visible to the EBGP neighbors. Each Autonomous System is fully meshed and contains a few connections to other Autonomous Systems. After specifying autonomous systems numbers for the BGP confederation, recycle the peers to update their configuration. Related Commands bgp confederation identifier bgp four-octet-as-support Configure a confederation ID. Enable 4-byte support for the BGP process. Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.8.1.0 Introduced on the S6000. Introduced on the Z9000. Introduced support on S-Series bgp dampening s z S6000 Enable BGP route dampening and configure the dampening parameters. Syntax bgp dampening [half-life reuse suppress max-suppress-time] [route-map map-name] To disable route dampening, use the no bgp dampening [half-life reuse suppress max-suppress-time] [route-map map-name] command. Parameters half-life (OPTIONAL) Enter the number of minutes after which the Penalty is decreased. After the router assigns a Penalty of 1024 to a route, the Penalty is decreased by half after the half-life period expires. Range: 1 to 45. Default: 15 minutes 220 | Border Gateway Protocol