Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 770

www.dell.com | support.dell.com Usage The default route must be present in the switch routing table for the default-information originate Information command to take effect. default-metric z S6000 Change the default metric for routes. Use this command with the redistribute command to ensure that all redistributed routes use the same metric value. Syntax default-metric number To return the default metric to the original values, enter no default-metric. Parameters number Specify a number. Range: 1 to 16. The default is 1. Default 1 Command Modes ROUTER RIP Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Usage This command ensures that route information being redistributed is converted to the same metric value. Information Related Commands redistribute Allows you to redistribute routes learned by other methods. description z S6000 Enter a description of the RIP routing protocol Syntax description {description} To remove the description, use the no description {description} command. Parameters description Enter a description to identify the RIP protocol (80 characters maximum). Defaults No default behavior or values Command Modes ROUTER RIP Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on the S6000. Introduced on Z9000 Related Commands router rip Enter ROUTER mode on the switch. 770 | Router Information Protocol (RIP)