Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 69

Example (show environment fan) Example (show environment pem) Example (show environment stack-unit) FTOS#s6000#show environment fan -- Fan Status -- Unit Bay TrayStatus Fan0 Speed Fan1 Speed ------ 0 0 up up 10134 up 10031 0 1 up up 10031 up 10134 0 2 up up 10031 up 10031 Speed in RPM * FTOS# FTOS#s6000#show environment pem -- Power Supplies -- Unit Bay Status Type FanStatus FanSpeed(rpm) 0 0 up AC up 10336 0 1 absent absent 0 * FTOS# FTOS#show environment stack-unit 0 -- Unit Environment Status -Unit Status Temp Voltage TempStatus * 0 online 35C ok 2 * Management Unit * Management Unit * Management Unit show inventory (S-Series and Z-Series) s z S6000 Display the S-Series or Z-Series switch type, components (including media), and FTOS version, including hardware identification numbers and configured protocols. Syntax show inventory [media slot] Parameters media slot (OPTIONAL) Enter the keyword media followed by the stack ID of the stack member for which you want to display pluggable media inventory. Note: This parameter is available but not supported in 8.3.11.4. Since stacking is not supported, if this parameter is used, the output will display "Media not present or accessible" (see "Usage" section). Defaults No default behavior or values Command Modes CONFIGURATION Command History Version 9.0.2.0 Introduced on S6000. Control and Monitoring | 69