Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 397

show gvrp statistics s z S6000 Display the GVRP configuration statistics. Syntax show gvrp statistics {interface interface | summary} Parameters interface interface summary Enter the keyword interface followed by one of the interface keywords and slot/port or number information: • For a Fast Ethernet interface, enter the keyword FastEthernet followed by the slot/port information. • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel interface, enter the keyword port-channel followed by the Port Channel number: S-Series Range: 1-128 • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. Enter the keyword summary to display just a summary of the GVRP statistics. Defaults No default values or behavior Command Modes EXEC EXEC Privilege Command History Version 9.0.2.0 Version 8.3.11.1 Version 8.2.1.0 Introduced on then S6000. Introduced on the Z9000. Introduced on the S-Series Example Usage Information Figure 18-3. show gvrp statistics Command Example FTOS#show gvrp statistics int gi 1/0 Join Empty Received: 0 Join In Received: 0 Empty Received: 0 LeaveIn Received: 0 Leave Empty Received: 0 Leave All Received: 40 Join Empty Transmitted: 156 Join In Transmitted: 0 Empty Transmitted: 0 Leave In Transmitted: 0 Leave Empty Transmitted: 0 Leave All Transmitted: 41 Invalid Messages/Attributes skipped: 0 Failed Registrations: 0 FTOS# Invalid messages/attributes skipped can occur in the following cases: • The incoming GVRP PDU has an incorrect length. • "End of PDU" was reached before the complete attribute could be parsed. • The Attribute Type of the attribute that was being parsed was not the GVRP VID Attribute Type (0x01). • The attribute that was being parsed had an invalid attribute length. GARP VLAN Registration (GVRP) | 397