Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 531

Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Usage Information IS-IS hellos are padded to the full maximum transmission unit (MTU) size. Padding IS-IS Hellos (IIHS) to the full MTU provides early error detection of large frame transmission problems or mismatched MTUs on adjacent interfaces. Related Commands isis hello padding Turn ON or OFF hello padding on an interface basis. hostname dynamic S6000 Enables dynamic learning of hostnames from routers in the domain and allows the routers to advertise the hostname in LSPs. Syntax hostname dynamic To disable this command, enter no hostname dynamic. Defaults Enabled. Command Modes ROUTER ISIS Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Usage Use this command to build name-to-systemID mapping tables through the protocol. All show Information commands that display systems also display the hostname. Related Commands clns host Define a name-to-NSAP mapping. ignore-lsp-errors S6000 Ignore LSPs with bad checksums instead of purging those LSPs. Syntax ignore-lsp-errors To return to the default values, enter no ignore-lsp-errors. Defaults In IS-IS, the default deletes LSPs with internal checksum errors (no ignore-lsp-errors). Command Modes ROUTER ISIS Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. | 531