Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 831
ip tacacs source-interface, tacacs-server host
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 831 highlights
Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. ip tacacs source-interface s z S6000 Specify an interface's IP address as the source IP address for TACACS+ connections. Syntax ip tacacs source-interface interface To delete a source interface, enter no ip tacacs source-interface. Parameters interface Enter the following keywords and slot/port or number information: • For an 100/1000 Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For Loopback interfaces, enter the keyword loopback followed by a number from zero (0) to 16838. • For the Null interface, enter the keywords null 0. • For the Port Channel interface, enter the keyword port-channel followed by a number: S-Series Range: 1-128 • For a Ten Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. • For VLAN interface, enter the keyword vlan followed by a number from 1 to 4094. • For a 40-Gigabit Ethernet interface, enter the keyword fortyGigE followed by the slot/port information. Defaults Not configured. Command Mode CONFIGURATION Command History Version 9.0.2.0 Version 8.3.11.1 Version 7.6.1.0 Introduced on the S6000. Introduced on Z9000 Introduced on the S-Series. tacacs-server host s z S6000 Specify a TACACS+ host. Syntax tacacs-server host {hostname | ip-address | ipv6-address} [port number] [timeout seconds] [key key] To remove a TACACS+ server host, use the no tacacs-server host {hostname | ip-address | ipv6-address} command. Security | 831