Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 551
show config, show isis database
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 551 highlights
show config S6000 Display the changes you made to the IS-IS configuration. Default values are not shown. Syntax show config Command Modes ROUTER ISIS (for IPv4) CONFIGURATION-ROUTER-ISIS-ADDRESS-FAMILY-IPV6 (for IPv6) Command History Version 9.0.2.0 Version 8.3.7.0 Introduced on the S6000. Introduced on the S4810. Examples Figure 23-2. Command Example: show config (router-isis mode) FTOS(conf-router_isis)#show config ! router isis clns host ISIS 49.0000.0001.F100.E120.0013.00 log-adjacency-changes net 49.0000.0001.F100.E120.0013.00 ! address-family ipv6 unicast maximum-paths 16 multi-topology transition set-overload-bit spf-interval level-1 100 15 20 Identifies that Multi-Topology IS-IS is enabled in transition mode spf-interval level-2 120 20 25 exit-address-family Figure 23-3. Command Example: show config (address-family-ipv6 mode) FTOS(conf-router_isis-af_ipv6)#show conf ! address-family ipv6 unicast maximum-paths 16 maximum-paths 16 multi-topology transition set-overload-bit spf-interval level-1 100 15 20 spf-interval level-2 120 20 25 exit-address-family Identifies that Multi-Topology IS-IS is enabled in transition mode show isis database z S6000 Display the IS-IS link state database. Syntax Parameters show isis database [level-1 | level-2] [local] [detail | summary] [lspid] level-1 level-2 local detail (OPTIONAL) Displays the Level 1 IS-IS link-state database. (OPTIONAL) Displays the Level 2 IS-IS link-state database. (OPTIONAL) Displays local link-state database information. (OPTIONAL) Detailed link-state database information of each LSP displays when specified. If not specified, a summary displays. | 551