Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 402
ip igmp immediate-leave, ip igmp last-member-query-interval
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 402 highlights
www.dell.com | support.dell.com Parameters number Enter the number of IGMP groups permitted to join in a second. Range: 1 to 10000 Defaults No default values or behavior Command Modes CONFIGURATION (conf-if-interface-slot/port) Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on then S6000. Introduced on the Z9000. ip igmp immediate-leave z S6000 Enable IGMP immediate leave. Syntax ip igmp immediate-leave [group-list prefix-list-name] To disable ip igmp immediate leave, use the no ip igmp immediate-leave command. Parameters group-list prefix-list-name Enter the keyword group-list followed by a string up to 16 characters long of the prefix-list-name. Defaults Not configured Command Modes INTERFACE Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on then S6000. Introduced on the Z9000. Usage Information Querier normally send a certain number of group specific queries when a leave message is received, for a group, prior to deleting a group from the membership database. There may be situations in which immediate deletion of a group from the membership database is required. This command provides a way to achieve the immediate deletion. In addition, this command provides a way to enable immediate-leave processing for specified groups. ip igmp last-member-query-interval z S6000 Change the last member query interval, which is the Max Response Time inserted into Group-Specific Queries sent in response to Leave Group messages. This interval is also the interval between Group-Specific Query messages. Syntax ip igmp last-member-query-interval milliseconds To return to the default value, enter no ip igmp last-member-query-interval. 402 | Internet Group Management Protocol (IGMP)