Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 303
show reload-type, show bootvar
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 303 highlights
Related Commands Use the reload-type command in BMP 2.0 to toggle between Normal and Jumpstart (BMP) auto-configuration modes. The reload settings for the auto-configuration mode that you configure are stored in memory and retained for future reboots and BMP software upgrades. You can enter the reload command at any time to reload the switch in the last configured mode: Normal reload or Jumpstart (BMP) mode. show reload-type stop jump-start Display the current reload mode (Normal or Jumpstart (BMP) mode) Stops the Jumpstart (BMP) process to prevent a loop if the DHCP server is not found. show reload-type z Display the currently configured reload mode. S6000 Syntax show reload-type Defaults None Command Modes EXEC Privilege Command History Version 9.0.2.0 version 9.0.0.0 Version 8.3.10.1 Introduced on the S6000. Introduced on the Z9000. Introduced on the S4810. Usage Information Use the show reload-type command to check the currently configured auto-configuration mode (Jumpstart or Normal reload) on a switch running BMP 2.0. You can also use the show bootvar command to display the current reload mode for BMP 2.0 with the path of the FTOS image file retrieved from a DHCP server. Example Related Commands FTOS#show reload-type Reload-Type : normal-reload [Next boot : normal-reload] config-scr-download : enable dhcp-timeout : Infinity user-defined-string : reload-type Configure the reload mode as Normal or BMP. Bare Metal Provisioning | 303