Dell S6000 FTOS 9.0(2.0) Command Line Reference Guide for the System - Page 940
show interface dei-honor, GigabitEthernet, port-channel
View all Dell S6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 940 highlights
www.dell.com | support.dell.com Parameters interface Enter the following keywords and slot/port or number information: • For a 1-Gigabit Ethernet interface, enter the keyword GigabitEthernet followed by the slot/port information. • For a Port Channel, enter the keyword port-channel followed by a number from 1 to 32 for EtherScale, 1 to 255 for TeraScale and ExaScale; 1 to 128 for S-Series. • For a 10-Gigabit Ethernet interface, enter the keyword TenGigabitEthernet followed by the slot/port information. Defaults Not configured. Command Mode CONF-IF-VLAN Command History Version 9.0.2.0 Version 8.3.11.1 Introduced on S6000. Introduced on Z9000 Usage You must enable the Stackable VLAN (using the vlan-stack compatible command) on the VLAN prior Information to adding a member to the VLAN. Related Commands vlan-stack compatible Enable Stackable VLAN on a VLAN. show interface dei-honor S6000 Display the dei honor configuration. Syntax show interface dei-honor [interface slot/port | linecard number port-set number] Parameters interface slot/port linecard number port-set number Enter the interface type followed by the stack-unit slot and port number. Enter linecard followed by the stack-unit slot number, then enter port-set followed by the port-pipe number. Command Mode EXEC Privilege Command History Example Related Commands Version 9.0.2.0 Introduced on S6000. FTOS#show interface dei-honor Default Drop precedence: Green Interface CFI/DEI Drop precedence Gi 0/1 0 Green Gi 0/1 1 Yellow Gi 8/9 1 Red Gi 8/40 0 Yellow dei honor Honor the incoming DEI value by mapping it to an FTOS drop precedence. 940 | VLAN Stacking