Brother International PDP350CJ Owner's Manual - English - Page 244

"To group objects: 1. Select the graphic objects you want to group. A set of handles appears around each object. 2. Choose Group from the Arrange menu. Drawing groups the selected objectstogether as a single graphic object. A single set of handles appears around the group. "To ungroup objects: 1. Select the group you want to ungroup. 2. Choose Ungroup from the Arrange menu. Drawing separates the components of the group into individual graphic objects. Handles appear around the individual objects. Pasting Inside If the two objects do not overlap, you cannot paste inside. When you paste an object inside another object, Drawing combines them into a single object that you can manipulate as you would any other Drawing object. The boundaries of the outside object become the boundaries of the inside object. The following procedure uses an example that shows how you can paste one object inside another. "To paste inside: 1. Place the inside object over the outside object. Position the inside object where you want it in the outside object, as shown in the following example: Be sure to position the interior object as close as possible to where you want it. You can fine tune it later, nudging it one pixel at a time, but you can save time by setting the precise position in this step. 2. Select the inside object. 3. Press CUT or click on the Cut icon. OR Choose Cut from the Edit menu. Either way, Drawing places the object on the clipboard. 4. Select the outside object. 5. Choose Paste Inside from the Edit menu. The submenu at the left appears. Drawing 229